Anywhere Hammock Setup Instructions
Component List
Carry Bag x1
Head-End Support Leg (Longer) x1
Foot-End Support Leg (Shorter) x1
Support Poles x4
Hammock Fabric x1
Hammock Assembly
Step 1: Set up the support legs.
Let the shock cord guide each pole section into place.
Make sure each pole section is fully seated and secured in the connector hub.
The Head-End and Foot-End Support Legs are labeled accordingly.
Step 2: Insert the first support poles (same diameter).
Hold the Head-End Support Leg upright.
Insert the two straight (same diameter) support poles into the two matching holes on the connector hub of the Head-End Support Leg until fully seated and secure.
Step 3: Insert the second support poles (reduced-end).
While holding the Head-End Support Leg steady, slide the two reduced-end (smaller-diameter) poles into the support poles until fully seated and secure.
Step 4: Attach the Foot-End Support Leg to the support poles.
While holding the support poles steady, insert the Foot-End Support Leg into the matching holes until fully seated and secure.
Step 5: Attach the hammock fabric.
Hook the 2 corners on the side of the hammock fabric with the pocket onto the Head-End Support Leg.
Hook the next 2 corners at the Foot-End Support Leg. Place one foot on the base (foot) of the support leg, and hold the long pole. Push the pole slightly away while pulling the fabric towards you to hook the fabric onto the Foot-End Support Leg.
Hammock Disassembly
Step 1: Remove the hammock fabric.
Unhook one end of the fabric first. Squat down for leverage and hold the long pole steady. Push the pole slightly away while pulling the fabric hook toward you to release it.
Repeat on the other end, then remove the fabric completely.
Step 2: Fold the hammock fabric.
Fold it half by bringing the two short ends together.
Fold it again lengthwise to form a neat rectangle.
Step 3: Remove one support leg.
Hold the support leg steady and pull it off the support poles.
Step 4: Remove the support poles.
Pull out the support poles and place them on top of the folded hammock fabric.
Step 5: Fold down the support legs.
Separate the pole sections from the connector hub as needed, then fold the legs down neatly.
Place them on the hammock fabric with the other parts.
Step 6: Roll and Pack
Roll everything up tightly and place it into the carry bag.
If you still have any questions on the setup and takedown process, email us at
We will get back to you as soon as we can.
Happy Camping! :)